 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
NOTE
Make sure all old gasket material is removed from oil filler cover and engine block
mating surfaces.
3.
INSTALL NEW OIL FILLER GASKET (16) ON ENGINE BLOCK (17).
4.
INSTALL OIL FILLER COVER (15), CLAMP (14) AND FOUR BOLTS (13). TIGHTEN FOUR BOLTS (12) TO 22-28
LB-FT (30-38 N.m).
5.
INSTALL HOSE (11) AND TWO HOSE CLAMPS (7) ON COUPLING (12). TIGHTEN LOWER HOSE CLAMP (7).
6.
INSTALL CLAMP (7) ON OIL FILL TUBE (8). INSERT OIL FILL TUBE (8) INTO HOSE (11) AND TIGHTEN UPPER
HOSE CLAMP (7).
7.
INSTALL CLAMP (5), WASHER (4), CAPSCREW (3), WASHER (2), AND NEW LOCK NUT (1) ON STANDOFF
BRACKET (6).
8.
INSTALL OIL FILL CAP (9) AND NEW SCREW (10) ON OIL FILL TUBE (8).
Change 3 4-17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals