 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
OIL FILL TUBE REPLACEMENT
INITIAL SETUP
Tools and Special Equipment:
Materials/Parts (Cont):
Tool Kit, SC 5180-90-CL-N26
Nut, Lock
Materials/Parts:
Compound, Pipe
Appendix C, Item 8
Sealing
Screw
P/N 23-1055-050
Gasket
P/N 8929302
NOTE
Configuration of all except M915A2 and M916A1 oil fill tube differs slightly from
M915A2 and M916A1. All except M915A2 and M916A1 configuration is shown.
REMOVAL
1.
REMOVE LOCK NUT (1), WASHER (2), CAPSCREW (3), WASHER (2), AND CLAMP (5) FROM STANDOFF
BRACKET (6). DISCARD LOCK NUT.
2.
LOOSEN TWO HOSE CLAMPS (7) AND REMOVE OIL FILL TUBE (8).
3.
REMOVE OIL FILL CAP (9) AND RIVET (10) FROM OIL FILL TUBE (8). DISCARD RIVET.
4.
REMOVE TWO HOSE CLAMPS (7) AND HOSE (11) FROM COUPLING (12).
5.
REMOVE FOUR BOLTS (13), CLAMP (1 4), OIL FILLER COVER (15), AND OIL FILLER GASKET (16) FROM
ENGINE BLOCK (17). DISCARD GASKET.
6.
REMOVE COUPLING (12) AND IRON NIPPLE (18) FROM OIL FILLER COVER (15).
7.
REMOVE CAPSCREW (19), WASHER (20), AND STANDOFF BRACKET (6) FROM ENGINE BLOCK (17).
CLEANING/INSPECTION
Clean and inspection all parts in accordance with Chapter 2.
INSTALLATION
1.
INSTALL STANDOFF BRACKET (6), WASHER (20), AND CAPSCREW (19) ON ENGINE BLOCK (17).
2.
COAT THREADS OF IRON NIPPLE (18) WITH PIPE SEALANT AND INSTALL IRO N NIPPLE (18) AND
COUPLING (12) IN OIL FILLER COVER (15).
4-16 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals