Assembly (Cont.) -726030528

TM 9-2320-360-34-2

28-2. WINCH REPAIR (CONT)

(55) Remove two guide screws (67) from planetary

adapter cover (71) and install two new

lockwashers (72) and remaining screws (73).

(56) Tighten 12 screws (73) to 200 lb-ft (271 Nm).

WARNING

Pipe thread sealing compound can

burn easily, can give off harmful

vapors, and is harmful to skin and

clothing. To avoid injury or death,

keep away from open fire and use in

well-ventilated area. If pipe thread

sealing compound gets on skin or

clothing, wash immediately with soap

and water.

(57) Coat two tube fittings (74) with pipe thread

sealing compound and install in clutch adapter

(75).

WARNING

Wear eye protection and use care

when installing retaining rings.

Retaining rings are under spring

tension and can act as projectiles

when released causing severe eye

injury.

NOTE

Clutch drive gear is secured to input

shaft with retaining ring.

(58) Install new retaining ring (76) and piston (77) on

clutch drive gear (78).

(59) Install new preformed packing (79) and two new

preformed packings (80) on piston (77). Coat

piston with oil.

(60) Install piston (77) on clutch adapter (75).

28-28