Pipe thread sealing compound can
burn easily, can give off harmful
vapors, and is harmful to skin and
clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If pipe thread
sealing compound gets on skin or
clothing, wash immediately with soap
(61) Coat two plugs (81) and vent (82) with pipe
thread sealing compound and install in planetary
adapter cover (71).
On direct contact, uncured silicone
sealant irritates eyes.
In case of
contact, flush eyes with water and
seek medical attention. In case of
skin contact, wipe off and flush with
Clutch adapter should be positioned
on planetary adapter cover as
marked during removal.
(62) Coat mating surfaces of planetary adapter cover
(71) and clutch adapter (75) with silicone
(63) Install clutch adapter (75) on planetary adapter
cover (71) with six new lockwashers (83) and
screws (84). Torque to 276 lb-in. (31.2 Nm).
Flat surface of thrust ring faces out.
(64) Install thrust ring (85) on clutch drive gear (78).
(65) Install bearing (86) on shaft (32).
(66) Install spring (87) on clutch adapter (75).