Assembly (Cont.) -726030527

TM 9-2320-360-34-2

(49) Install two guide screws (67) at opposite

positions in gear end support (8).

WARNING

On direct contact, uncured silicone

sealant irritates eyes.

In case of

contact, flush eyes with water and

seek medical attention. In case of

skin contact, wipe off and flush with

water.

(50) Coat both sides of ring gear (68) with silicone

adhesive-sealant.

WARNING

Ring gear weighs 62 lb (28 kg). Keep

out from under ring gear. Failure to

comply may result in injury or death

to personnel.

(51) Align marks made during disassembly and

install ring gear (68) on planetary carrier (65)

and gear end support (8).

(52) Install clutch sun gear (69) on input shaft (32).

(53) Install new retaining ring (70) on input shaft (32).

NOTE

Breather hole and drain hole must be

in the 12 o'clock and 6 o'clock

positions.

(54) Install planetary adapter cover (71) on ring gear

(68) with 10 new lockwashers (72) and screws

(73). Do not tighten.

28-27