Assembly (Cont.) -726030526

TM 9-2320-360-34-2

28-2. WINCH REPAIR (CONT)

(45) Install preformed packing (61) and 12

compression springs (62) on brake adapter (43).

(46) Install brake housing (48) on brake adapter (43)

with six new lockwashers (63) and screws (64).

Torque to 55 lb-ft (74.6 Nm).

(46.1) Install hose (64.1) on elbow (42.2).

(46.2) Install hose (64.1) on side support (18) with nut

(64.2).

(46.3) Install drain cap (64.3) on hose (64. 1).

WARNING

Planetary carrier weighs 100 lb (45

kg). Keep out from under planetary

carrier. Failure to comply may result

in injury or death to personnel.

(47) Install planetary carrier (65) on output shaft (2)

with aid of assistant.

WARNING

Wear eye protection and use care

when installing retaining rings.

Retaining rings are under spring

tension and can act as projectiles

when released causing severe eye

injury.

NOTE

Retaining ring is

located

inside

planetary carrier.

(48) Install retaining ring (66) on end of output shaft

(2).

28-26 Change 1