Cleaning/inspection -726030488

TM 9-2320-360-34-2

b. Cleaning/inspection

(1)

Remove remaining lithium grease from housing.

WARNING

Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and

gloves and use only in well-ventilated area. Avoid contact with skin, eyes, and

clothing, and don't breath vapors. DO NOT use near open flame or excessive heat.

The flash point Is 100-138 F (38-59 C). If you become dizzy while using cleaning

solvent, get fresh air immediately and medical aid. If contact with eyes is made,

wash your eyes with water and get medical aid immediately.

CAUTION

Do not wash machined parts together to avoid damage from parts bumping

together.

(2)

Wash metal parts in dry cleaning solvent.

(3)

Clean sealant residue from threaded holes with dry cleaning solvent.

CAUTION

Dirt and foreign material in steering system will cause damage and steering

problems.

(4)

Clean old gasket material from housing and/or plates

(5)

Inspect parts for damage, cracks, breaks, or deterioration.

(6)

Inspect parts with machined surfaces for deep scratches.

(7)

Remove small nicks or burrs with crocus cloth.

(8)

Coat internal parts with light coating of lithium grease.

(9)

Replace unserviceable parts.

c. Assembly

(1)

Coat two bearing cones (1 and 2) with grease.

(2)

Install two bearing cups (3) in pinion end plate

(4).

27-45