 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
23-2. TRANSFER CASE REPAIR (CONT)
(76) Install lifting eye (75) in center shaft (26).
WARNING
Center shaft weighs 140 lb (64 kg).
Stay clear of center shaft when
supported by lifting device. Center
shaft may fall and cause serious
Injury to personnel.
(77) install center shaft assembly (79) in
transfer case rear half (48) while assistant
operates lifting device.
(78) Remove lifting eye (75) from center shaft
(26).
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and is
harmful to skin and clothing. To
avoid Injury or death, keep away from
open fire and use In well-ventilated
area. If adhesive-sealant gets on skin
or clothing, wash Immediately with
soap and water.
(79) Coat holes in retainer plate (80) and two
screws (81) with adhesive-sealant (Item 6,
(80) Install retainer plate (80) on center shaft
(26) with two screws (81). Torque to 40
lb-ft (54 Nm).
NOTE
Lip on collar should face top of case.
(81) Install collar (82) on lower fork assembly
(83).
(82) Coat hole (84) in bearing retaining plate
(63) and shaft of lower shift fork assembly
(83) with grease.
(83) Install lower shift fork assembly (83) in
bearing retaining plate (63).
23-26
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals