 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
23-2. TRANSFER CASE REPAIR (CONT)
(45)
Turn transfer case rear half (2) so outside
surface faces up.
NOTE
Tag and mark shims before removal.
(46)
Remove six screws (70), lockwashers
(71), upper end cap (72), and shims (73)
from transfer case rear half (2). Discard
lockwashers.
(47)
Remove plug (74) from upper end cap
(72).
(47.1)
Remove two screws (74.1), washers
(74.2), and cover plate (74.3) from
adapter end plate (77).
(48)
Remove six screws (75), adapter end
plate (77), and shims (78) from transfer
case rear half (2).
NOTE
Do step (49) if bearings or races fail
inspection.
(49)
Remove two outer races (79 and 80) from
transfer case rear half (2).
(50)
Remove seal (81) from lower end cap
(82). Discard seal.
(51)
Remove six screws (83), lockwashers
(84), lower end cap (82), and shims (85)
from transfer case rear half (2).
NOTE
Do step (52) if bearings or races fail
inspection.
(52)
Remove outer race (86) from transfer
case rear half (2).
23-8 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals