 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
NOTE
Inner bearing races may fall out.
(53)
Turn transfer case front half (19) so
outside surface faces up.
(54)
Remove seal (87) from upper end cap
(88). Discard seal.
(55)
Remove six screws (89), lockwashers
(90), and upper end cap (88) from transfer
case front half (19). Discard lockwashers.
NOTE
Do step (56) if bearings or races fail
inspection.
(56)
Remove two outer races (91 and 92) from
transfer case front half (19).
(57)
Remove seal (93) from transfer case front
half (19). Discard seal.
(58)
Remove pilot ring (94) from transfer case
front half (19).
NOTE
Do step (59) if dowel pins fail inspection.
(59)
Remove two dowel pins (95) from transfer
case front half (19).
WARNING
Input shaft weighs 110 lb (50 kg).
Stay clear of input shaft when
supported by lifting device. Input
shaft may fall and cause serious
injury to personnel.
NOTE
Yoke may be used to hold shaft when
removing screws.
(60)
Remove two screws (96), pump drive
plate (97), and teflon piston ring (98) from
input shaft (18). Discard teflon piston
ring.
23-9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals