(1) Soak eight friction plates (1) in oil for 2
Aligning the splines in the friction
plates during installation will allow
for simple installation of the rear
planetary ring gear.
Install nin e clutch plates (1 and 2) in
transmission housing (3), starting with
steel plate (2) and alternating with friction
plate (1). Align the splines on the friction
Install rear planetary ring gear (4) in
clutch plates (2).
Install remaining clutch plates (1 and 2) in
transmission housing, starting with friction
plate (1) and alternating with steel plate
Lightly coat one side of gasket (5) with
grease and set gasket on transmission
housing (3) with greased side of gasket
Adapter housing is installed with
transmission housing (3).
Install rear cover and first clutch (para 22-17).