 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
22-17. REAR COVER AND FIRST CLUTCH REPAIR (CONT)
(11) Position rear cover (1) flange side up.
Use wooden block for support.
(12) Install clutch spring compressor tool (15)
in rear cover (1).
WARNING
Wear eye protection and use care
when installing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
injury.
(13) Compress clutch spring compressor tool
and remove large external retaining ring
(16) from rear cover (1).
(14) Remove clutch spring compressor tool
(15) from rear cover (1).
(15) Remove piston spring retainer (17) from
first clutch piston (18).
(16) Remove vent tube (19) from rear cover
(1).
(17) Remove 30 piston release springs (20)
from first clutch piston (18).
(18) Remove first clutch piston (18) from rear
cover (1).
(19) Remove inner seal ring (21) and outer
seal ring (22) from rear cover (1). Discard
seal rings.
NOTE
Do step (20) only if dowel pins are
damaged.
(20) Remove dowel pins (23 and 24) from rear
cover (1).
(21) Remove two small plugs (25) and large
plug (26) from rear cover (1).
22-100
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals