|
|
TM 9-2320-360-34-2
22-9. FIFTH CLUTCH REPAIR (CONT).
NOTE
Staking must withstand a 30 lb (133
N) load applied through the bleed
hole.
(5)
Inspect eight balls (2) for freedom of movement
and proper staking. Replace balls if damaged.
WARNING
Dry cleaning solvent P-D-680 Is toxic
and flammable.
Wear protective
goggles and gloves and use only in a
well-ventilated area. Avoid contact
with skin, eyes, and clothes, and
don't breathe vapors. DO NOT use
near open flame or excessive heat.
The flash point Is 100-1380F (38-
590C). If you become dizzy while
using cleaning solvent, get fresh air
immediately and medical aid.
If
contact with eyes is made, wash your
eyes with water and get medical aid
immediately.
(6) Clean eight ball pockets (3) with dry cleaning
solvent.
WARNING
Compressed
air
for
cleaning
purposes will not exceed 30 psi (207
kPa). Use only with effective chip
guarding and personal protective
equipment (goggles/shield, gloves,
etc.).
(7) Dry ball pockets (3) with compressed air.
(8) Apply lubricating oil around area of ball pockets
(3).
d. Assembly
NOTE
Do step (1)
only if
balls
were
removed.
(1) Install eight balls (1) in ball pockets (2). Stake
clutch housing (3) to retain balls.
22-50
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |