FORWARD CLUTCH AND TURBINE SHAFT REPAIR (CONT) -726030217

TM 9-2320-360-34-2

22-8.

FORWARD CLUTCH AND TURBINE SHAFT REPAIR (CONT)

(15) Place wooden blocks on ground.

(16) Position forward clutch assembly (4) on blocks

with turbine shaft (2) facing up.

(17) Lift forward clutch assembly (4) 12 in. (30 cm)

with aid of assistant. Drop clutch assembly (4)

on wooden blocks to free forward clutch piston

(16). Remove piston (16) from clutch assembly

(4).

(18) Remove inner seal ring (18) and outer seal ring

(19) from forward clutch piston (16). Discard

seal rings.

NOTE

Do steps (19) thru (22) if PTO gear

has missing or damaged teeth or if

pitot collector ring is damaged or

distorted. Otherwise, go to para 22-

8c.

(19) Install shim stock (20) in gap between retaining

ring (21) and teeth of PTO gear

(22) Push retaining ring in forward clutch assembly

(4) and put shim stock every 3 in. (76 mm)

around forward clutch assembly. (20) Secure

shim stock (20) in place with electrical tape.

(21) Place PTO gear removal fixture ( 3) in press.

Install forward clutch assembly (4) on PTO gear

removal fixture (23) with shaft pointing up.

(22) Press forward clutch assembly (4) out of PTO

gear (22). Remove PTO gear (22), forward

clutch assembly (4), pitot collector ring (24), and

PTO gear removal fixture (23) from press.

22-40