|
|
TM 9-2320-360-34-2
(11) Install spring compressor tool (17) on front
support assembly (10).
WARNING
Wear eye protection and use care
when installing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
Injury.
(12) Install washer (18) and retaining ring (19) on
main pressure regulator valve spring (15).
(13) Remove spring compressor tool (17) from front
support assembly (10).
CAUTION
Keep valve clean and free from nicks
and burrs. Failure to comply will
result in difficulty in assembly.
(14) Install lockup shift valve (20) small end first in
front support assembly (10).
(15) Install valve spring (21) and valve stop (22) in
front support assembly (10).
(16) Install spring compressor tool (17) on front
support assembly (10).
(17) Install washer (23) and new retaining ring (24)
on valve spring (21).
(18) Remove spring compressor tool (17) from front
support assembly (10).
22-31
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |