FLYWHEEL ASSEMBLY/LOCKUP CLUTCH REPAIR (CONT) -726030191

TM 9-2320-360-34-2

22-4. FLYWHEEL ASSEMBLY/LOCKUP CLUTCH REPAIR (CONT)

NOTE

Do step (3) only if pins were

removed.

Pins should be installed so 0.330-

0.320 in. (8.38-8.13 mm) remains

above surface.

(3)

Install six pins (3) in flywheel (4).

(4)

Coat outside of hub (5) and new seal ring

(6) with lubricating oil.

(5)

Install new seal ring (6) on hub (5).

(6)

Coat outer groove of piston (7) and new

seal ring (8) with lubricating oil.

(7)

Install new seal ring (B) on groove of

piston (7).

(8)

Coat inner hub (9) of piston (7) and piston

seal surface of flywheel (4) with

lubricating oil.

(9)

Position piston (7) on flywheel (4) and

align six holes with six pins (3) on

flywheel (4). Seat piston (7) firmly on

pins.

(10)

Install two keys (10) in flywheel (4).

Installation

(1) Install lifting bracket (1) on flywheel

assembly (2) with two screws (3).

22-14