If torque converter turbine remains in
transmission, go to step (14).
Position flywheel assembly (1) on level
surface so torque converter turbine (1)
Pry up evenly to remove torque
converter turbine from flywheel. Use
shop towels at two pry points to
prevent scoring or other damage to
torque converter turbine or flywheel.
Remove torque converter turbine (11)
from flywheel assembly (1).
Remove backplate (15) and lockup clutch
plate (16) from flywheel (1).
Turn flywheel assembly (1) over so
screws (3) face up.
Remove two screws (3) and lifting bracket
(2) from flywheel assembly (1).
(1) Remove two keys (1) from flywheel (2).