FLYWHEEL ASSEMBLY/LOCKUP CLUTCH REPAIR (CONT) -726030187

TM 9-2320-360-34-2

22-4. FLYWHEEL ASSEMBLY/LOCKUP CLUTCH REPAIR (CONT)

WARNING

Leave one screw in place behind lifting bracket. Screw is intended to secure

flywheel assembly until lifting device is in place. Failure to comply may result in

serious injury to personnel and damage to equipment.

NOTE

Use flywheel lifting bracket to turn flywheel for access to screws inside torque

converter housing.

(4)

Remove 29 of 30 screws (8) and

lockwashers (9) from torque converter

pump (10) and flywheel assembly (1) with

aid of assistant. Discard lockwashers.

(5)

Install lifting device on lifting bracket (2).

(6)

Raise lifting device until it supports weight

of flywheel assembly (1).

(7)

Remove remaining screw (8) and

lockwasher (9) from flywheel assembly

(1). Discard lockwasher.

CAUTION

Torque converter turbine may be

removed with flywheel or remain in

transmission.

Ensure that torque

converter turbine is supported to

prevent it from falling when removing

flywheel.

Failure to comply may

result in damage to converter turbine.

(8)

Hold torque converter turbine (11) on

flywheel (1) while assistant operates lifting

device.

(9)

Remove flywheel assembly (1) with

torque converter turbine (11) from torque

converter pump (10).

(10)

Remove seal ring (12) from turbine shaft

(13). Discard seal ring.

(11)

Remove seal ring (14) from torque

converter pump (10). Discard seal ring.

22-10