TURBOCHARGER REPAIR (CONT) -726030167

TM 9-2320-360-34-2

20-3. TURBOCHARGER REPAIR (CONT)

c. Assembly

WARNING

Wear protective goggles and use

care when Installing retaining rings.

Retaining rings are under spring

tension and can act as projectiles

when released causing severe eye

Injury.

(1) Install retaining ring (1) in center housing (2)

using retaining ring pliers (Item 105, Appendix

E) (3).

(2) Install thrust washer (4), bearing (5), and

retaining ring (6) in turbine side of center

housing (2) using retaining ring pliers (3).

(3) Install retaining ring (7), thrus t washer (8), and

bearing (9) in center housing (2) using retaining

ring pliers (3).

(4) Install thrust collar retainer (10) on thrust collar

(11) with oil groove facing housing (2).

(5) Install thrust collar retainer (10) and thrust collar

(11) in center housing (2) with three screws (12).

Torque to 80-100 lb-in. (9.0-11.3 Nm).

(6) Install new seal ring (13) in center housing (2).

(7) Install two new metal seal rings (14) on thrust

spacer (15).

(8) Install thrust spacer (15) in backplate (16).

20-22