 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
(7) Measure diameters of turbo wheel shaft journals
(8 and 9) on shaft (10). Journal diameters must
be 0.6250-0.6254 in. (15.875-15.885 mm).
(8) Measure inside diameter of bore (11). Inside
diameter of bore (11) must not be greater than
0.3749 in. (9.522 mm).
(9) Measure inside diameter of center housing (12).
Inside diameter of center housing (12) must not
be greater than 0.9842 in. (24.999 mm).
(10) Measure seal bore (13). Seal bore (13) must
not be greater than 0.6895 in. (17.513 mm).
(11) Measure inside diameter of bearing (14).
Bearing (14) inside diameter must not be greater
than 0.9842 in. (24.999 mm).
(12) Measure thrust collar thickness (15). Thrust
collar (15) thickness must not be less than
0.2970 in. (7.543 mm). Thrust collar bore inside
diameter must not be greater than 0.3778 in.
(9.596 mm).
(13) Measure ring groove width. Ring groove width
will not be greater than 0.0715 in. (1.816 mm).
Thrust spacer (16) outside diameter must not be
less than 0.6705 in. (17.030 mm).
(14) Replace damaged parts or parts that do not
meet specifications.
20-21
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals