MAIN BEARING AND CRANKSHAFT REPAIR (CONT) -726030086

TM 9-2320-360-34-2

d. Follow-On Maintenance (Cont)

(6) Install oil pressure relief valve (para 3-21).

(7) Install oil pressure regulator valve (para 3-22).

(8) Install oil pan (par a 3-20).

(9) Install cylinder heads (para 3-10).

(10) Install Injectors (para 4-2).

(11) Install rocker arms (para 3-18).

(12) Install engine brake retarders (para 3-26).

(13) Install engine brake retarder wire harnesses (para 6-16).

(14) Install blo wer accessory drive hub (para 4-9).

(15)

Install crankshaft vibration damper and cover (para 3-15).

(16) Install crankshaft pulley (para 3-12).

(17) Install right thermostat housing (para 5-4).

(18) Install left thermostat housing (para 5-3).

(19) Adjust valve clearance, engine brake retarder, and fuel injector timing (para 3-27).

(20) Install 12-volt (rear) alternator/bracket (TM 9-2320-360-20).

(21) Install fuel Injector wire harnesses (para 4-3).

(22) Install rocker covers (TM 9-2320-360-20).

(23) Install DDEC oil pressure sensor (TM 9-2320-360-20).

(24) Install thermostats (TM 9-2320-360-20).

(25) Install electronic control module (ECM) (TM 9-2320-360-20).

(26) Install fan clutch (TM 9-2320-360-20).

(27) Install fan belts (TM 9-2320-360-20).

(28) Install fan (TM 9-2320-360-20).

(29) Remove engine from engine stand (para 19-3).

(30) Install air box covers (para 3-8).

(31) Install air box drains (para 3-9).

(32) Install exhaust manifolds (para 3-23).

(33) Install 24-volt (front) alternat or/bracket (TM 9-2320-360-20).

(34) Install 150 amp circuit breakers (TM 9-2320-360-20).

(35) Install starter (TM 9-2320-360-20).

(36) Install sending units and attachments (TM 9-2320-360-20).

19-71