ENGINE BLOCK REPAIR (CONT) -726030038

TM 9-2320-360-34-2

(18) Open drain cocks (25) and drain antifreeze and

water from engine block (3).

(19) Remove 20 screws (19), spacers (18), and 2

plates (17) from engine block (3).

(20) Remove engine block pressure test core plug

(22) and gasket (23) from aftercooler water inlet

adapter (21) using core plug remover/installer

(24). Discard gasket.

(21) Install new gasket (26) and aftercooler water

Inlet adapter (27) on engine block (3) using

aftercooler water inlet adapter installer (24).

Torque to 230-250 lb-ft (312-339 Nm).

(22) Remove two screws (15), nuts (16), lockwashers

(14), water inlet cover plate (13) and gasket (12)

from right side of engine block (3). Discard

lockwashers and gasket.

(23) Remove eight compression gaskets (6) from

cylinders (7). Discard gaskets.

(24) Remove 4 shims (11), 2 oil hole seals (8) and 32

water hole seals (9) from 34 counterbored holes

(10) on each side of engine block (3).

19-23