|
| |
TM 9-2320-360-34-1
10-7. AXLE NO. 4 PIVOT, SPINDLE, AND AXLE SHAFT REPAIR
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Differential drained (axle no. 4 only)
Puller Kit, Mechanical, Gear and Brg
(LO 9-2320-360-12).
(Item 124, Appendix E)
Brake bracket and camshaft removed
Wrench, Torque, 0-600 Lb-Ft (Item 233,
(para 11-3).
Appendix E)
Tie rod end removed (TM 9-2320-360-20).
Wrench, Torque, 0-175 Lb-Ft (Item 236,
Rear brake chamber removed
Appendix E)
(TM 9-2320-360-20).
Drag link removed (left side only) (para 13-3).
Materials/Parts
Adhesive-Sealant, Silicone (Item 2, Appendix B)
Tools and Special Tools
Adhesive-Sealant (Item 4, Appendix B)
Tool Kit, Genl Mech (Item 202, Appendix E)
Cloth, Crocus (Item 16, Appendix B)
Adapter, Removal Tool (Figure C-19,
Compound, Sealing, Pipe Thread
Appendix C)
(Item 28, Appendix B)
Compressor Unit, Air (Item 24, Appendix E)
Grease, General Purpose,(Item 34, Appendix B)
Cover, King Pin Preload (Item 26, Appendix E)
Oil, Lubricating (Item 44, Appendix B)
Extractor, King Pin (Item 39, Appendix E)
Solvent, Dry Cleaning (Item 54, Appendix B)
Gage, Depth, Micrometer (Item 48, Appendix E)
Tags, Identification (Item 56, Appendix B)
Goggles, Industrial (Item 57, Appendix E)
Cross (2) (Item 9.1, Appendix F)
Hammer, Slide (Item 64, Appendix E)
Seals, Oil (2) (Item 306, Appendix F)
Multiplier, Torque (Item 99, Appendix E)
Sealing Kit (Item 295, Appendix F)
Pliers, Retaining Ring (Item 110, Appendix E)
Press, Hydraulic (Item 116, Appendix E)
Personnel Required
Two
a.
Removal
(1)
Remove hose (1) from tee (2).
(2)
Remove tube assembly (3) from tee (2)
and fitting (4).
(3)
Remove tee (2) from fitting (5).
(4)
Remove fitting (5) from pivot and spindle
assembly (6).
(5)
Remove fitting (4) from pivot and spindle
assembly (6).
(6)
Remove hose (7) from elbow (8).
(7)
Remove elbow (8) from pivot and spindle
assembly (6).
Change 1 10-39
|
