|
| |
TM 9-2320-360-34-1
6-15.1. DDEC III WIRE HARNESS REPLACEMENT (CONT)
(10)
Install electrical connector (17) on coolant
temperature sensor (18).
NOTE
Plastic
cable
ties
should
be
positioned
in
locations
marked
during removal.
(11)
Secure DDEC III wire harness (1) with
plastic cable ties (19) as required.
c.
Follow-On Maintenance
(1)
Install ECM (TM 9-2320-360-20).
(2)
Install inner fender (TM 9-2320-360-20).
6-192.6/(6-192.7 blank) Change 3
|
