|
| |
TM 9-2320-360-34-1
WARNING
Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and
gloves and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and don't breathe vapors. DO NOT use near open flame or excessive heat.
The flash point is 100-138° F (38-59° C). If you become dizzy while using cleaning
solvent, get fresh air immediately and medical aid. It contact with eyes is made,
wash your eyes with water and get medical aid immediately.
(2)
Clean metal parts with dry cleaning solvent and wire brush.
WARNING
Compressed air for cleaning purposes will not exceed 30 psi (207 kPa). Use only
with effective chip guarding and personal protective equipment (goggles/shield,
gloves, etc.).
(3)
Dry metal parts with compressed air.
(4)
Inspect thermostat housing for cracks or other damage. Replace damaged parts.
c.
Installation
WARNING
Pipe thread sealing compound can
burn easily, can give off harmful
vapors, and is harmful to skin and
clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If pipe thread
sealing compound gets on skin or
clothing, wash immediately with soap
and water.
CAUTION
Use pipe thread sealing compound
sparingly only on pipe threads. Do
not
apply
compound
to
hose
connections. Damage to equipment
may result.
(1)
Coat threads of plug (1) and connector (2)
with pipe thread sealing compound.
(2)
Install
connector
(2)
on
thermostat
housing (3).
(3)
Install plug (1) in thermostat housing (3).
5-13
|
