|
| |
TM 9-2320-360-34-1
3-5. ENGINE REPLACEMENT
This task covers:
a. Removal
c. Installation
b. Engine Preparation
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Transmission removed (para 7-4).
Compound, Sealing, Pipe Thread (Item 28,
Engine oil drained (LO 9-2320-360-12).
Appendix B)
Compound, Sealing (Item 22.1, Appendix B)
Tools and Special Tools
Tags, Identification (Item 56, Appendix B)
Tool Kit, Genl Mech (Item 202, Appendix E)
Ties, Cable, Plastic (Item 60, Appendix B)
Adapter, Socket Wrench, 1/2 In. Female -
Gaskets (2) (Item 30, Appendix F
3/8 In. Male (Item 5, Appendix E)
Locknuts (2) (Item 96, Appendix F)
Jackstands, 7-Ton (8) (Item 93, Appendix E)
Lockwashers (16) (item 122, Appendix F)
Screws (4) (Item 150, Appendix E)
Lockwashers (2) (Item 120, Appendix F)
Pan, Oil Drain (Item 102, Appendix E)
Lockwasher (Item 119, Appendix F)
Sling Assembly (2) (Item 160, Appendix E)
Lockwasher (Item 121, Appendix F)
Sling, Endless Strap (Item 161, Appendix E)
Preformed Packings (2) (Item 165, Appendix F)
Wrench, Crow's Foot, 3/4 In. (Item 219,
Preformed Packing (Item 177, Appendix F)
Appendix E)
Washers, Pressure (2) (Item 337, Appendix F)
Wrench, Crow's Foot, 5/8 In. (Item 220,
Appendix E)
Special Environmental Conditions
Wrench, Open End, 1-7/8 In. & 1-11/16 In.
Engine on hard, level surface.
(Item 225, Appendix E)
Wrench, Torque, 0-175 Lb-Ft (Item 236,
Personnel Required
Appendix E)
Two
Wrench, Torque, 0-75 Lb-In. (Item 237,
Appendix E)
a.
Removal
(1)
Place oil drain pan under steering pump
(1) to catch draining fluid.
CAUTION
Ends of lines and fittings must be
covered after removal to prevent
system contamination. Failure to
comply may result in damage to
equipment.
NOTE
Tag and mark hoses before removal.
(2)
Remove hose no. 2278 (2), hose no. 2302
(3),
hose
no.
2701
(4),
and
three
preformed packings (5, 6, and 7) from
steering pump (1). Discard preformed
packings.
Change 1 3-39
|
