|
| |
TM 9-2320-360-34-1
3-5. ENGINE REPLACEMENT (CONT)
(3)
Place drain pan under air compressor (8)
to catch draining fluid.
(4)
Remove two hoses no. 2628 (9) from air
compressor (8) and engine (10).
WARNING
Steering pump weighs approximately
112 lb (51 kg). Properly support
steering
pump
during
removal.
Failure to comply may result in
serious personnel injury.
(5)
Attach suitable lifting device to steering
pump (1).
(6)
Remove four screws (11), lockwashers
(12), screw (13), and lockwasher (14) from
adapter housing (15) and engine (10).
Discard lockwashers.
NOTE
Gently strike steering pump with soft-
faced mallet to unseat mounting
flange from engine.
(7)
Remove
steering
pump
(1),
adapter
housing (15), gasket (16), drive coupling
(17), and drive coupling (18) from engine
(10) with aid of assistant. Discard gasket.
(8)
Place steering pump (1) and adapter
housing (15) on clean flat surface and
remove lifting device.
(9)
Remove locknut (19), screw (20), clip (21),
and hose no. 2278 (4) from standoff
bracket (22). Discard locknut.
(10)
Remove locknut (23), screw (24), and two
cushion clips (25) from standoff bracket
(22) and transmission oil cooler hoses no.
2701 (26) and no. 2302 (27). Discard
locknut.
3-40
|
