|
| |
TM 9-2320-360-34-1
3-4. ENGINE CONTAINER PACKING/UNPACKING (CONT)
WARNING
Engine weighs approximately 3801 lb
(1399 kg). Support engine during
removal. Failure to comply may
result in serious injury to personnel.
Keep out from under heavy parts.
Falling parts may cause serious
injury or death to personnel.
(3)
Align and install engine (2) in lower
container (5).
(4)
Install two washers (6), screws (7), new
lockwashers (8), and nuts (9) on inner
frame (10).
(5)
Install four screws (11), washers (12), new
lockwashers (13), and nuts (14) on rear
support (1).
(6)
Repeat step (5) for other support.
(7)
Tighten 12 screws (4) to 71-83 lb-ft (96-
112 Nm).
(8)
Tighten nuts (9 and 14) to 31-37 lb-ft (42-
50 Nm).
(9)
Remove lifting device.
d.
Upper Container Installation
WARNING
Keep out from under heavy parts.
Falling parts may result in serious
injury to personnel.
(1)
Install upper container (1) on lower
container (2).
NOTE
When tightening nuts, use crisscross
pattern working around container.
(2)
Install 30 screws (3), washers (4), and
nuts (5) in upper container (1) and lower
container (2). Torque to 31-37 lb-ft (42-50
Nm).
3-38 Change 1
|
