|
| |
TM 9-2320-360-34-1
(2)
Remove four nuts (2), lockwashers (3),
washers (4), and screws (5) from rear
support (6). Discard lockwashers.
(3)
Repeat step (2) for other side.
(4)
Remove two nuts (7), lockwashers (8),
screws (9), and washers (10) from inner
frame (11). Discard lockwashers.
(5)
Remove engine (1) from lower container
(12).
(6)
Remove four screws (13), lockwashers
(14), and rear support (6) from engine (1).
Discard lockwashers.
(7)
Repeat step (6) for other support.
c.
Engine Installation
(1)
Install rear support (1) on engine (2) with
four new lockwashers (3) and screws (4).
Do not tighten.
(2)
Repeat step (1) for other support.
Change 1 3-37
|
