|
| |
TM 9-2320-360-34-1
(10) Remove delrin liner (23) from rear suspension
arm (9). Discard liner.
(11) Remove steel sleeve (24) from suspension arm
(9). Discard sleeve.
b. Installation
(1) Install new steel sleeve (1) in rear suspension
arm (2).
(2) Install new delrin liner (3) in rear suspension arm
(2).
(3) Place suspension arm (2) on floor jack (4).
(4) Position suspension arm (2) on axle (5) and
frame hanger (6) with aid of assistant.
CAUTION
Use care when installing screw
through delrin liner. Failure to
comply may damage liner.
(5)
Install suspension arm (2) on frame hanger (6)
with new screw (7) and new locknut (8). Torque
to 800 lb-ft (1085 Nm).
15-21
|
