Air Compressor Drive Gear

114

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

7. Connect oil hose assembly (4) to the air

compressor. Connect the clip that holds the hose

assembly to the air compressor. Tighten bolt (8)

that holds the clip to a torque of 28 7 Nm

(21 5 lb ft).

8. Connect water hose (1) and (3) to the air

compressor.

9. Connect air hose (2) to the air compressor.

10. Fill the cooling system with coolant to the correct

level. Refer to the Operation and Maintenance

Manual for the correct filling procedure.

i01748230

Air Compressor Drive Gear -

Remove

SMCS Code: 1803-011-GE

g00705242

Illustration 289

Typical example

Removal Procedure

a. Position the bracket for the air compressor

Table 55

and install bolts (9) and bolts (10) finger tight.

Required Tools

NOTICE

Tool

Part

Part Description

Qty

A loose compressor bracket can lead to a broken front

Number

cover and can cause damage to the front gear train of

132-5451

Holding Fixture

the engine.

Start By:

b. Tighten bolts (9) to a torque of 55 10 Nm

(40 7 lb ft). Tighten bolts (10) to a torque of

a. Remove the air compressor. Refer to Disassembly

55 10 Nm (40 7 lb ft). Remove the lifting

and Assembly, "Air Compressor - Remove and

device and Tooling (A).

Install".

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened

component life.

g00609682

Illustration 290