Cylinder Head - Install

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

g00611336

g00611342

Illustration 188

Illustration 190

2. Remove bolts (1), bolts (2), and washers that

2. Install a new cylinder head gasket (3).

hold the cylinder head to the cylinder block.

Carefully remove the cylinder head from the

cylinder block. The cylinder head weighs

approximately 85 kg (187 lb).

g00746424

Illustration 191

Note: To avoid damage to the cylinder head gasket,

use guide bolts of an appropriate size to install the

g00611342

cylinder head.

Illustration 189

3. Attach a suitable lifting device to the cylinder

3. Remove cylinder head gasket (3).

head. Position the cylinder head assembly onto

the dowels in the cylinder block. Lower the

i01624119

cylinder head onto the cylinder block.

Cylinder Head - Install

SMCS Code: 1100-012

Installation Procedure

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened

component life.

1. Thoroughly clean the mating surfaces of the

cylinder head and the cylinder block.

g00611336

Illustration 192

Typical example