 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-2
Truck Engine
Disassembly and Assembly Section
i01747605
i01747620
Crankshaft Front Seal -
Crankshaft Front Seal - Install
Remove
SMCS Code: 1160-012
SMCS Code: 1160-011
Installation Procedure
Removal Procedure
Table 34
Required Tools
Table 33
Part
Required Tools
Tool
Part Description
Qty
Number
Part
1U-7430
A
1
Front Seal Installer
Tool
Part Description
Qty
Number
1
1U-7600
Slide Hammer Puller
A
NOTICE
1
1U-8145
B
Drill Bit
Keep all parts clean from contaminants.
Start By:
Contaminants may cause rapid wear and shortened
component life.
a. Remove the vibration damper and the pulley.
Refer to Disassembly and Assembly, "Vibration
Note: Ensure that the flange of the crankshaft and
Damper and Pulley - Remove and Install".
the front housing are thoroughly clean before you
install the crankshaft front seal.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
g00612634
Illustration 158
g00612597
Illustration 157
Note: Do not damage the flange of the crankshaft
during the removal of the seal.
1. Use Tooling (B) and carefully drill three evenly
spaced holes in crankshaft front seal (1).
2. Alternate between the drilled holes and use
Tooling (A) to remove crankshaft front seal (1).
g00612636
Illustration 159
Note: Refer to Specifications, "Crankshaft Seals" for
information on the distance between the following
items: the front face of the crankshaft front seal and
the front face of the front housing.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals