Passwords

TM 9-2320-312-24-2

Troubleshooting Section

OCT01 and newer Personality Modules.

i01728841

Passwords

This parameter sets a voltage trip point. When

the voltage falls below the trip point the ECM will

SMCS Code: 1901

automatically elevate the engine speed to the rpm

that is specified in the "Battery Monitor & Low Idle

"Customer Password #1"

Engine Speed" parameter.

"Customer Password #1" is a password that is

Table 114

assigned by the customer. The "Customer Password

Manufacturer

#1" is eight digits in length. A customer password is

Minimum

Maximum

Default

/ Model

required to change any of the customer specified

GM 530/540

0 Volts

parameters.

GMT-560

0 Volts

25.5 Volts

11.5 Volts

"Customer Password #2"

Other

0 Volts

"Customer Password #2" is an additional eight digits

that will decrease the possibility of breaking the

"Battery Monitor Low Idle Engine Speed"

customer password. This is an optional password.

OCT01 and newer Personality Modules.

Table 113

Alternative

Default

This parameter sets the engine speed if the battery

voltage falls below the trip point that is specified

"Eight Alphanumeric

"Not Programmed"

in the "Battery Monitor & Engine Control Voltage"

Characters Available"

parameter.

Table 115

i01726757

Minimum

Maximum

Default

Selected Engine Rating

700 rpm

1000 rpm

TEL

SMCS Code: 1901

"Rating Number"

i01727555

Trip Parameters

The Rating Number is the selected Rating within a

power rating family. The Personality Module defines

the power rating family (224 kW (300 hp)) and the

SMCS Code: 1901

personality module may contain only one or several

ratings. The rating number defines the power rating

"Dash - PM 1 Reset"

that is used within the power rating family.

This parameter determines if the Caterpillar Driver

ECM Identification Parameters

Information Display (Cat ID) can be used to reset

the PM 1 Maintenance Interval. The "Maintenance

Indicator Mode" cannot be programmed to "OFF"

"Vehicle ID"

for the PM 1 reset parameter to take effect.

"Vehicle Identification" is the identification of the

Table 116

vehicle that is assigned by the customer. "Vehicle

Alternative

Default

Identification" is used only for the customer's

reference. "Vehicle Identification" is not required by

"YES"

"NO"

the ECM.

OCT01 and newer Personality Modules.

i01727431

Smart Idle Parameters

SMCS Code: 1901

"Battery Monitor & Engine Control Voltage"