|
|
TM 9-2320-312-24-1
FIFTH WHEEL LIFT HYDRAULIC PUMP REPLACEMENT - CONTINUED
0161 00
REMOVAL
WARNING
When servicing this vehicle, performing maintenance, or disposing of materials such as engine coolant,
transmission fluid, lubricants, battery acids or batteries, consult your unit/local hazardous waste disposal
center or safety office for local regulatory guidance. If further information is needed, please contact The
Army Environmental Hotline at 1-800-872-3845.
CAUTION
Wipe area clean around all hydraulic connections prior to disconnecting. Cap or plug all openings after
disconnecting. Contamination of hydraulic system could result in equipment failure.
NOTE
Use a drain pan to capture hydraulic fluid in hoses. Dispose of fluid in accordance with local policy
and ordinances. Ensure all spills are cleaned up.
Tag hydraulic hoses and note position of all fittings to ensure correct installation.
Remove and discard tiedown straps as necessary to gain free movement in hydraulic hoses. Use
new tiedown straps on installation.
1.
Disconnect two hydraulic hoses (1) from two elbows (2) of fifth wheel lift hydraulic pump (3).
WARNING
Fifth wheel lift hydraulic pump is heavy. Use caution when handling to avoid injury.
2.
Remove two bolts (5), lockwashers (6), and fifth wheel lift hydraulic pump (3) from PTO (4). Discard bolts and
3.
Remove two elbows (2) from fifth wheel lift hydraulic pump (3).
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |