 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
POWERPACK REPLACEMENT - CONTINUED
0138 00
NOTE
Tag all fluid lines and fittings and electrical harnesses and connectors, to ensure correct installation.
Remove all clamps and tiedown straps required to release fluid and air lines and electrical wiring.
Discard tiedown straps. Use new tiedown straps on installation.
REMOVAL
1.
If vehicle is equipped with auxiliary arctic heater, disconnect coolant hoses from engine.
2.
Remove crossmember (1) from between frame rails and reposition against left frame rail as follows:
a.
Disconnect engine oil sampling valve hose from elbow at crossmember (1) (WP 0132 00).
b.
Disconnect hydraulic hoses (3) from flow control valve (2) (WP 0128 00). DO NOT disconnect load sensing gauge
hose (4) or fifth wheel lift control cable (5) from valve.
c.
Remove flow control valve (2) with attached components from crossmember (1) and place out of the way
along left side of vehicle (WP 0128 00).
2
1
3
4
5
0138 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals