 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
HYDRAULIC FILTER MAINTENANCE - CONTINUED
0131 00
FILTER HEAD REMOVAL
WARNING
When servicing this vehicle, performing maintenance, or disposing of materials such as engine coolant,
transmission fluid, lubricants, battery acids or batteries, consult your unit/local hazardous waste disposal
center or safety office for local regulatory guidance. If further information is needed, please contact The
Army Environmental Hotline at 1-800-872-3845.
CAUTION
Wipe area clean around all hydraulic connections prior to disconnecting. Cap or plug all openings after
disconnecting. Contamination of hydraulic system could result in equipment failure.
NOTE
Use a drain pan to capture hydraulic fluid in hydraulic hoses. Dispose of hydraulic fluid in accor-
dance with local policy and ordinances. Ensure all spills are cleaned up.
Tag hydraulic hoses and note position of filter head and fittings to ensure correct installation.
Cut tiedown strap and discard. Use new tiedown strap on installation.
1.
Remove filter element (Refer to Filter Element Replacement).
2.
Disconnect two hydraulic hoses (11) from tee (3).
3.
Disconnect hydraulic hose (10) from elbow (9).
4.
Remove two bolts (6) and filter head (2) from bracket (8).
5.
Remove tee (3), elbow (4), and adapter (5) from inlet to filter head (2).
6.
Remove elbow (9) from outlet to filter head (2).
4
5
2
6
8
9
3
10
11
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals