FILTER ELEMENT REPLACEMENT - TM-9-2320-312-24-10780

TM 9-2320-312-24-1

HYDRAULIC FILTER MAINTENANCE - CONTINUED

0131 00

FILTER ELEMENT REPLACEMENT

WARNING

When servicing this vehicle, performing maintenance, or disposing of materials such as engine coolant,

transmission fluid, lubricants, battery acids or batteries, consult your unit/local hazardous waste disposal

center or safety office for local regulatory guidance. If further information is needed, please contact The

Army Environmental Hotline at 1-800-872-3845.

CAUTION

Wipe area clean around all hydraulic connections prior to disconnecting. Cap or plug all openings after

disconnecting. Contamination of hydraulic system could result in equipment failure.

NOTE

Hydraulic filter element is filled with hydraulic fluid. Dispose of filter element and hydraulic fluid in

accordance with local policy and ordinances. Ensure all spills are cleaned up.

Using strap wrench, remove filter element (1) from filter head (2).

Coat gasket sealing surface of new filter element (1) with hydraulic fluid. Fill filter element with hydraulic fluid.

Install filter element (1) to filter head (2) and tighten with strap wrench.

0131 00-2