HYDRAULIC FILTER MAINTENANCE

TM 9-2320-312-24-1

HYDRAULIC FILTER MAINTENANCE

0131 00

THIS WORK PACKAGE COVERS

Filter Element Replacement

Filter Head: Removal, Installation

INITIAL SETUP

Materials/Parts

Maintenance Level

Cap set, protective (Item 6, WP 0165 00)

Unit

Fluid, hydraulic, petroleum base (Item 25 or 26,

MAC Reference

Rag, wiping (Item 51, WP 0165 00)

Group 190

Strap, tiedown (Item 57, WP 0165 00)

Tag, marker (Item 58, WP 0165 00)

RPSTL Reference

Filter element, fluid (P/N 102D-52)

Group 190, Figure 3

References

Tools and Special Tools

WP 0129 00

Tool kit, general mechanic's (Item 35, WP 0166 00)

Equipment Condition

Fifth wheel fully lowered (TM 9-2320-312-10)

Shop equipment, common no. 1 (Item 28, WP 0166

Engine shut down

WARNING

DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pressure

has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid under

pressure can penetrate the skin, causing serious injury.

Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If an acci-

dent occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed

within a few hours or gangrene may result.

At operating temperature, hydraulic fluid is hot. Allow hydraulic fluid to cool before disconnecting any

hydraulic lines. Failure to do so could result in serious burns.

Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may

result in injury to personnel.