CAB TILT CYLINDER REPLACEMENT

TM 9-2320-312-24-1

CAB TILT CYLINDER REPLACEMENT

0123 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Materials/Parts

Maintenance Level

Unit

Cap set, protective (Item 6, WP 0165 00)

Fluid, hydraulic, automatic transmission, Dexron

MAC Reference

III (Item 24, WP 0165 00)

Group 190

Rag, wiping (Item 51, WP 0165 00)

RPSTL Reference

Tag, marker (Item 58, WP 0165 00)

Group 190, Figure 2

Pin, cotter (P/N 60-78) (2)

Tools and Special Tools

References

Tool kit, general mechanic's (Item 35, WP 0166 00)

TM 9-2320-312-10

Shop equipment, common no. 1 (Item 28, WP 0166

WARNING

DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pressure

has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid under

pressure can penetrate the skin, causing serious injury.

Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If an acci-

dent occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed

within a few hours or gangrene may result.

At operating temperature, hydraulic fluid is hot. Allow hydraulic fluid to cool before disconnecting any

hydraulic lines. Failure to do so could result in serious burns.

Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may

result in injury to personnel.