|
| |
TM 9-2320-304-14&P
2-41
Operating Instructions (Cont)
f. Normal Transfer of Flatrack to Trailer.
WARNING
·
Prior to and during any load or unload cycle, all personnel should stay clear of LHS
and flatrack or serious injury or death to personnel could result.
·
Trailer wheels must be chocked during transfer operations or serious injury or
death to personnel could result.
CAUTION
·
Ensure that trailer drawbar is down against the ground during transfer operations
or damage to equipment may result.
·
Ensure air lines and cables are properly stowed to prevent damage to equipment
(TM 9-2330-385-14).
·
Both trailer bumper points must be under the truck bumper stop flange and at least
one of the bumper points must contact the bumper stop. The trailer bumper point
not contacting the truck bumper stop cannot exceed 0.5 in. (12.7 mm) or flatrack
will miss main rail guides and equipment damage may result.
(1) Back up truck so that trailer bumper (1) is under flange and contacts truck bumper stop (2).
|
