|
| |
TM 9-2320-304-14&P
2-42
Operating Instructions (Cont)
2-9. LOAD HANDLING SYSTEM (LHS) (CONT).
(2) Pull out PARKING BRAKE control (3) and set transmission range selector (4) to N (Neutral).
WARNING
·
When operating M1120 truck with M1076 trailer, the heaviest loaded flatrack must
always be placed on the truck, otherwise adverse handling and/or braking may
result, causing injury or death to personnel.
·
Ensure trailer air system is pressurized before beginning transfer, or flatrack locks
may not properly engage/disengage. Serious injury or death to personnel could
result.
CAUTION
There must be sufficient air pressure in trailer air system to retract flatrack locks or
damage to flatrack locks can occur while attempting to load flatrack on trailer. If not, use
truck to charge trailer air system using trailer air charging hose. If air system cannot
retract flatrack locks, use manual flatrack lock retract procedure (TM 9-2330-385-14).
(3) Push knob (5) in and retract flatrack locks (6) on trailer.
CAUTION
Ensure both flatrack locks are fully retracted or damage to equipment may result.
(4) Inspect that both flatrack locks (6) are fully retracted.
|
