|
| |
TM 9-2320-304-14&P
5-142.5
Organizational Maintenance Instructions (Cont)
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
NOTE
Sealing compound is applied to metallic
side of thrust washer.
(4)
Apply sealing compound (Loctite 680) to
thrust washer (6).
(5)
Apply adhesive (Loctite 409) to six
points in recessed groove for preformed
packing (7).
NOTE
Thrust washer is properly installed with
metallic side to arm assembly.
(6)
Install thrust washer (6), preformed
packing (7), and seal (8) in arm
assembly (3).
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
Sealing compound is applied to metallic
side of thrust washer.
(7)
Apply sealing compound (Loctite 680) to
thrust washer (9).
(8)
Apply adhesive (Loctite 409) to six
points in recessed groove for preformed
packing (10).
NOTE
Thrust washer is properly installed with
metallic side to arm assembly.
(9)
Install preformed packing (10), thrust
washer (9), and seal (11) on arm
assembly (3).
Change 1
|
