|
| |
TM 9-2320-304-14&P
5-125
Direct Support and General Support Maintenance (Cont)
WARNING
Main frame cylinder weighs 325 lbs. (148 kg). Attach suitable lifting device prior to
installation to prevent possible injury to personnel.
(9) Attach lifting device to main frame cylinder (3).
WARNING
Use care when removing retaining rings. Retaining rings are under tension and can act as
projectiles when released causing injury to personnel.
NOTE
It may be necessary to use soft faced hammer to aline cylinder rod end with clevis on main
frame.
(10) With the aid of another soldier and using lifting device, lift main frame cylinder (23) into main
frame (3) and install pivot pin (24), shim (25), and retaining ring (26).
(11) Remove lifting device from main frame cylinder (23).
|
