|
| |
TM 9-2320-304-14&P
5-113
Direct Support and General Support Maintenance (Cont)
d. Assembly.
(1) Install four bulkhead fittings (1),
lockwashers (2), and nuts (3) on main
frame (4).
NOTE
·
Apply light coat of grease to outer
surface of bushings prior to
installation.
·
Apply light coat of grease to threads
of removal/installation tool prior to
use.
(2) Using hook arm and main frame
bushing removal/installation tool, aline
lube hole in bushing (5) with lube fitting
hole in main frame (4) and install two
bushings (5) as shown.
NOTE
If lube fitting hole is restricted by bushing
go to step (3) of b. Disassembly.
(3) Check lube fitting hole in hook arm for
restrictions.
|
