|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
4-130
Organizational Maintenance Instructions (Cont)
4-18. TROUBLESHOOTING INSTRUCTIONS (CONT).
Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS) (CONT)
16. LHS DOES NOT LOAD IN AUTO MODE (CONT).
WARNING
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive
electrical circuits, a direct short may result. Damage to equipment and injury or death to
personnel may occur.
Step 5. Check for 22 to 28 Vdc on wire 1461 at LHS junction box terminal 1 with ENGINE switch
in the ON position.
If Vdc measurement is below specification, repair wire 1461 or notify DS Mainte-
nance.
Step 6. Check for continuity between wire 1435 and ground with wire 1435 (going to connector
MC87) removed from terminal 3.
If there is no continuity, repair wire 1435 or notify DS Maintenance.
|
