|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
4-129
Organizational Maintenance Instructions (Cont)
Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS) (CONT)
16. LHS DOES NOT LOAD IN AUTO MODE (CONT).
WARNING
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive
electrical circuits, a direct short may result. Damage to equipment and injury or death to
personnel may occur.
NOTE
Only remove center screw on engine side of LHS main junction box cover.
Step 4. Check for 22 to 28 Vdc at main junction box terminal 9 with ENGINE switch in ON
position.
If Vdc measurement is below specification, go to Fault 6.
If there are 22 to 28 Vdc, go to Step 5. of this Fault.
|
