|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
4-46
Organizational Maintenance Instructions (Cont)
4-18. TROUBLESHOOTING INSTRUCTIONS (CONT).
Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS) (CONT)
4. LHS OVER LOAD INDICATOR DOES NOT GO OUT.
NOTE
Only remove center screw on engine side of LHS control box cover.
Step 1. Remove harness connector and check for continuity at overload differential pressure
switch.
If there is no continuity, switch is OK. Replace LHS distribution box (Para 4-34).
If there is continuity, overload differential pressure switch is faulty. Notify DS
Maintenance.
|
