|
| |
TM 9-2320-304-14&P
2-103
Operating Instructions (Cont)
d. Manual Removal of Flatrack.
WARNING
M1077 flatrack weighs 3,200 lbs. (1 452 kg). M1077A1 flatrack weighs 3,900 lbs. (1 769 kg).
Attach suitable lifting device prior to removal or installation to prevent possible injury to
personnel.
CAUTION
·
It is not possible to load a flatrack onto a truck in this manner or equipment damage
may result.
·
Attempting to unload flatrack with LHS rear load locks engaged will result in
damage to flatrack and possible damage to LHS.
·
Flatrack must be empty before attempting to re-engage hook and hook bar or
damage to equipment may result.
NOTE
·
If complete system failure or hydraulic failure as described in this paragraph does
not allow normal operation, remove payload or flatrack and payload from truck.
·
Flatrack is considered engaged in LHS rear load locks when any part of flatrack
lock is under LHS lock.
(1) Remove flatrack with lifting device as follows:
(a) Secure lifting slings to flatrack lifting eyes (1).
|
