|
| |
TM 9-2320-304-14&P
2-104
Operating Instructions (Cont)
2-14. EMERGENCY PROCEDURES (CONT).
WARNING
Lift hook weighs 200 lbs. (91 kg). Attach suitable lifting device prior to removal or
installation to prevent possible injury to personnel.
(b) Apply tension to sling and lift flatrack slightly to relieve pressure on locking pin (2).
Remove pin (3), washer (4), and locking pin (2) from lift hook (5).
(c) Using a lifting device, lift flatrack slightly. (Flatrack will not rise due to flatrack hook bar
being engaged under lift hook (5) and load locks being engaged.)
WARNING
Personnel must stand clear of flatrack and lift hook areas during manual unload procedures
or injury to personnel may result.
(d) Using another truck or an anchor point, pull flatrack rearwards from lift hook (5) until lift
hook clears and falls free of flatrack hook bar (6).
(2) Move lift hook back into position and install locking pin (2), washer (4), and pin (3) in lift
hook (5).
|
